Enhancing insulin sensitivity in type 2 diabetes mellitus using apelin-loaded small extracellular vesicles from Wharton's jelly-derived mesenchymal stem cells: a novel therapeutic approach.

BACKGROUND: Type 2 diabetes mellitus (T2DM), characterized by ß-cell dysfunction and insulin resistance (IR), presents considerable treatment challenges. Apelin is an adipocyte-derived factor that shows promise in improving IR; however, it is limited by poor targeting and a short half-life. In the present study, engineered small extracellular vesicles (sEVs) derived from Wharton's jelly-derived mesenchymal stem cells (WJ-MSCs) loaded with apelin were used to address the limitations of the therapeutic application of apelin. METHODS: WJ-MSCs were transduced to obtain engineered sEVs loaded with overexpressed apelin (apelin-MSC-sEVs) and the control sEVs (MSC-sEVs). T2DM mice were injected with apelin-MSC-sEVs and MSC-sEVs, and blood glucose monitoring, glucose and insulin tolerance tests, confocal microscopy, and immunocytochemical analysis were performed. IR models of 3T3-L1 adipocytes were employed to detect GLUT4 expression in each group using western blotting; the affected pathways were determined by measuring the changes in Akt and AMPK signaling and phosphorylation. RESULTS: Upon successful engineering, WJ-MSCs demonstrated significant overexpression of apelin. The genetic modification did not adversely impact the characteristics of sEVs, ranging from surface protein markers, morphology, to particle size, but generated apelin-overexpressed sEVs. Apelin-MSC-sEVs treatment resulted in notable enhancement of Akt and AMPK pathway activities within 3T3-L1 adipocytes and adipose tissues of T2DM mice. Furthermore, the apelin-loaded sEVs significantly reduced plasma glucose levels, increased pancreatic ß-cell proliferation, improved insulin and glucose tolerance, and modulated pro-inflammatory cytokine profiles, compared to mice treated with the control sEVs. CONCLUSION: Our study developed novel genetically engineered apelin-loaded sEVs derived from WJ-MSCs, and demonstrated their potent role in augmenting insulin sensitivity and regulating inflammatory responses, highlighting their therapeutic promise in T2DM management. The findings open new avenues for the development of clinically viable treatments for T2DM in humans using the apelin-loaded sEVs.

Tislelizumab plus chemotherapy is an optimal option for second-line treatment for advanced gastroesophageal junction adenocarcinoma.

The development of programmed cell death receptor-1 and its ligand (PD-L1) have offered new treatment options for several cancers, but the clinical benefit of tislelizumab in the gastroesophageal junction (GEJ) adenocarcinoma is still murky. Thus, we aim to investigate the efficacy and safety of tislelizumab combined with chemotherapy in patients with GEJ cancer. In this study, 90 GEJ patients were retrospectively enrolled including 45 patients who received chemotherapy plus tislelizumab while 45 underwent chemotherapy only. Overall response rate (ORR), overall survival (OS), and progression-free survival (PFS) were estimated and safety was assessed by treatment-related adverse events between two arms. The ORR was significantly higher in the tislelizumab group than in patients with chemotherapy alone (71.1 vs. 44.4%). The PFS [54.7% (47.2-62.2) vs. 33.3% (26.3-40.3), P = 0.047] and OS [62.1% (54.5-69.7) vs. 40.0% (32.5-47.5), P = 0.031] were also significantly improved in patients with concomitant use of tislelizumab. When stratified by PD-L1 combined positive score (CPS), patients with PD-L1 CPS ≥ 1 also with significantly higher PFS and OS when taking tislelizumab (P = 0.015 and P = 0.038). The incidence of hematologic toxicity was similar in the combination arm compared to the chemotherapy alone arm and the number of adverse events was not significantly increased by adding tislelizumab (all P > 0.05). Concomitant use of tislelizumab and chemotherapy in GEJ patients may be with optimal therapeutic effect and similar incidence of adverse events than chemotherapy alone. Further studies with larger number of patients are warranted to confirm it.

Facile Preparation of Photothermal Superhydrophobic Melamine Sponge Decorated with MXene and Lignin Particles for Efficient Oil/Water Separation, Fast Crude Oil Recovery, and Active Deicing.

Frequent oil spills and the discharge of oily wastewaters have caused a serious threat to the environment, ecosystems, and human beings. Herein, a photothermal and superhydrophobic melamine sponge (MS) decorated with MXene and lignin particles has been prepared for the separation of oil/water mixtures, the recovery of crude oils, and active deicing. The obtained superhydrophobic melamine sponge shows a water contact angle (WCA) of 152.3° and an oil contact angle of ∼0° and possesses good chemical stability, thermal stability, and mechanical durability in terms of being immersed in various liquids (i.e., corrosive solutions, organic solvents, and boiling water) and being abrased by sandpapers. This superhydrophobic MS displays a high oil adsorption capacity of CCl4, up to 91.6 times its own weight and a high separation efficiency of 99.4%. Furthermore, the maximum surface temperature of the superhydrophobic MS reaches 57.5 °C under sunlight irradiation (1.0 kW/m2) due to the excellent photothermal heating conversion performance of MXene and lignin particles. When exposed to sunlight, the superhydrophobic MS can quickly absorb viscous crude oils up to 72 times its own weight. Also, the WCA of the superhydrophobic MS remains above 146° after 50 icing/deicing cycles, showing excellent photothermal anti-icing properties. Thus, this study presents an easy and low-cost method for designing photothermal superhydrophobic melamine sponges and opens a new avenue to the applications of efficient oil/water separation, fast crude oil recovery, and active deicing.

Porous lignin-based composites for oil/water separation: A review.

Frequent oceanic oil spill incidents and the discharge of industrial oily wastewaters have caused serious threats to environments, food chains and human beings. Lignin wastes with many reactive groups exist as the byproducts from bioethanol and pulping processing industries, and they are either discarded as wastes or directly consumed as a fuel. To make full use of lignin wastes and simultaneously deal with oily wastewaters, porous lignin-based composites have been rationally designed and prepared. In this review, recent advances in the preparation of porous lignin-based composites are summarized in terms of aerogels, sponges, foams, papers, and membranes, respectively. Then, the mechanisms and the application of porous lignin-based adsorbents and filtration materials for oil/water separation are discussed. Finally, the challenges and perspectives of porous lignin-based composites are proposed in the field of oil/water separation. The utilization of abundant lignin wastes can replace fossil resources, and meanwhile porous lignin-based composites can be used to efficiently treat with oily wastewaters. The above utilization strategy opens an avenue to the rational design and preparation of lignin wastes with high-added value, and gives a possible solution to use lignin wastes in a sustainable and environmentally friendly way.

Magnetic Resonance Imaging Nanoprobe Quantifies Nitric Oxide for Evaluating M1/M2 Macrophage Polarization and Prognosis of Cancer Treatments.

Macrophages play a crucial role in immune activation and provide great value in the prognosis of cancer treatments. Current strategies for prognostic evaluation of macrophages mainly target the specific biomarkers to reveal the number and distribution of macrophages in the tumors, whereas the phenotypic change of M1 and M2 macrophages in situ is less understood. Here, we designed an ultrasmall superparamagnetic iron oxide nanoparticle-based molecular imaging nanoprobe to quantify the repolarization of M2 to M1 macrophages by magnetic resonance imaging (MRI) using the redox-active nitric oxide (NO) as a vivid chemical target. The nanoprobe equipped with O-phenylenediamine groups could react with the intracellular NO molecules during the repolarization of M2 macrophages to the M1 phenotype, leading to electrical attraction and colloidal aggregation of the nanoprobes. Consequently, the prominent changes of the T1 and T2 relaxation in MRI allow for the quantification of the macrophage polarization. In a 4T1 breast cancer model, the MRI nanoprobe was able to reveal macrophage polarization and predict treatment efficiency in both immunotherapy and radiotherapy paradigms. This study presents a noninvasive approach to monitor the phenotypic changes of M2 to M1 macrophages in the tumors, providing insight into the prognostic evaluation of cancer treatments regarding macrophage-mediated immune responses.

Photothermal, Magnetic, and Superhydrophobic PU Sponge Decorated with a Fe3O4/MXene/Lignin Composite for Efficient Oil/Water Separation.

Frequent oil spills and the discharge of industrial oily wastewaters have become a serious threat to the environment, ecosystem, and human beings. Herein, a photothermal, magnetic, and superhydrophobic PU sponge decorated with a Fe3O4/MXene/lignin composite (labeled as S-Fe3O4/MXene/lignin@PU sponge) has been designed and prepared. The obtained superhydrophobic/superoleophilic PU sponge possesses excellent chemical stability, thermal stability, and mechanical durability in terms of being immersed in corrosive solutions and organic solvents and boiling water and being abrased by sandpapers, respectively. The oil adsorption capacities of the S-Fe3O4/MXene/lignin@PU sponge for various organic liquids range from 29.1 to 70.3 g/g, and the oil adsorption capacity for CCl4 can remain 69.6 g/g even after 15 cyclic adsorption tests. The separation efficiencies of the S-Fe3O4/MXene/lignin@PU sponge for n-hexane and CCl4 are higher than 98% in different environments (i.e., water, hot water, 1 mol/L NaOH, 1 mol/L NaCl, and 1 mol/L HCl). More importantly, the introduction of three light absorbers (i.e., Fe3O4, MXene, and lignin) into the S-Fe3O4/MXene/lignin@PU sponge shows a synergistic effect in the photothermal heat conversion performance, and the maximum surface temperature reaches 64.4 °C under sunlight irradiation (1.0 kW/m2). The separation flux of the S-Fe3O4/MXene/lignin@PU sponge for viscous LT147 vacuum pump oil reaches 35,469 L m-2 h-1 under sunlight irradiation, showing an increase of 27.3% compared to that of oil adsorption processes without the photothermal effect. Thus, the rational design of superhydrophobic sponges by introducing proper photothermal heat absorbers provides new insights into facile and cost-effective preparation of sponges for efficient oil/water separation.

Hepatic macrophages play critical roles in the establishment and growth of hydatid cysts in the liver during Echinococcus granulosus sensu stricto infection.

Cystic echinococcosis (CE) is a worldwide neglected zoonotic disease caused by infection with the larval stage of the tapeworm Echinococcus granulosus sensu lato (E. granulosus s.l.), which predominantly resides in the liver accompanied by mild inflammation. Macrophages constitute the main cellular component of the liver and play a central role in controlling the progression of inflammation and liver fibrosis. However, the role of hepatic macrophages in the establishment and growth of hydatid cysts in the liver during E. granulosus sensu stricto (E. granulosus s.s.) infection has not been fully elucidated. Here, we showed that CD68+ macrophages accumulated in pericystic areas of the liver and that the expression of CD163, a marker of anti-inflammatory macrophages, was more evident in active CE patients than in inactive CE patients. Moreover, in a mouse model of E. granulosus s.s. infection, the pool of hepatic macrophages expanded dramatically through the attraction of massive amounts of monocyte-derived macrophages (MoMFs) to the infection site. These infiltrating macrophages preferentially polarized toward an iNOS+ proinflammatory phenotype at the early stage and then toward a CD206+ anti-inflammatory phenotype at the late stage. Notably, the resident Kupffer cells (KCs) predominantly maintained an anti-inflammatory phenotype to favor persistent E. granulosus s.s. infection. In addition, depletion of hepatic macrophages promoted E. granulosus s.s. larval establishment and growth partially by inhibiting CD4+ T-cell recruitment and liver fibrosis. The above findings demonstrated that hepatic macrophages play a vital role in the progression of CE, contributing to a better understanding of the local inflammatory responses surrounding hydatid cysts and possibly facilitating the design of novel therapeutic approaches for CE.

Anemoside B4 attenuates RANKL-induced osteoclastogenesis by upregulating Nrf2 and dampens ovariectomy-induced bone loss.

Increased numbers and functional overactivity of osteoclasts are the pathological basis for bone loss diseases such as osteoporosis, which are characterized by cortical bone thinning, decreased trabecular bone quantity, and reduced bone mineral density. Effective inhibition of osteoclast formation and bone resorption are important means of treating such skeletal diseases. Anemoside B4 (AB4), the main active component of Pulsatilla chinensis, possesses a wide range of anti-inflammatory and immunoregulatory effects. However, its effect and mechanism in osteoclast differentiation remain unclear. In this study, we found through tartrate-resistant acidic phosphatase (TRAcP) staining and immunofluorescence staining that AB4 inhibited the differentiation, fusion, and bone-resorption functions of osteoclasts induced by receptor activator of nuclear factor κB ligand (RANKL) in vitro. Additionally, real time PCR (RT-qPCR) and western blot analysis showed AB4 downregulated the expression of osteoclast marker genes, including Nfatc1, Fos, and Ctsk, while upregulating Nrf2 expression. AB4 (5 mg/kg) alleviated bone loss in ovariectomized mice by inhibiting osteoclast formation. Furthermore, the knockout of Nrf2 weakened the inhibitory effects of AB4 on osteoclast formation and related gene expression. In summary, the results suggest AB4 can inhibit osteoclast differentiation and function by activating Nrf2 and indicate AB4 may be a candidate drug for osteoporosis.

Correction: Luan et al. Identification of Critical Genes for Ovine Horn Development Based on Transcriptome during the Embryonic Period. Biology 2023, 12, 591.

In the original publication [1], there were mistakes in the order of the references, which were as follows: [...].

Shear and hydrostatic stress regulate fetal heart valve remodeling through YAP-mediated mechanotransduction.

Clinically serious congenital heart valve defects arise from improper growth and remodeling of endocardial cushions into leaflets. Genetic mutations have been extensively studied but explain less than 20% of cases. Mechanical forces generated by beating hearts drive valve development, but how these forces collectively determine valve growth and remodeling remains incompletely understood. Here, we decouple the influence of those forces on valve size and shape, and study the role of YAP pathway in determining the size and shape. The low oscillatory shear stress promotes YAP nuclear translocation in valvular endothelial cells (VEC), while the high unidirectional shear stress restricts YAP in cytoplasm. The hydrostatic compressive stress activated YAP in valvular interstitial cells (VIC), whereas the tensile stress deactivated YAP. YAP activation by small molecules promoted VIC proliferation and increased valve size. Whereas YAP inhibition enhanced the expression of cell-cell adhesions in VEC and affected valve shape. Finally, left atrial ligation was performed in chick embryonic hearts to manipulate the shear and hydrostatic stress in vivo. The restricted flow in the left ventricle induced a globular and hypoplastic left atrioventricular (AV) valves with an inhibited YAP expression. By contrast, the right AV valves with sustained YAP expression grew and elongated normally. This study establishes a simple yet elegant mechanobiological system by which transduction of local stresses regulates valve growth and remodeling. This system guides leaflets to grow into proper sizes and shapes with the ventricular development, without the need of a genetically prescribed timing mechanism.

Identification of Critical Genes for Ovine Horn Development Based on Transcriptome during the Embryonic Period.

Horns, also known as headgear, are a unique structure of ruminants. As ruminants are globally distributed, the study of horn formation is critical not only for increasing our understanding of natural and sexual selection but also for the breeding of polled sheep breeds to facilitate modern sheep farming. Despite this, a significant number of the underlying genetic pathways in sheep horn remain unclear. In this study, to clarify the gene expression profile of horn buds and investigate the key genes in horn bud formation, RNA-sequencing (RNA-seq) technology was utilized to investigate differential gene expression in the horn buds and adjacent forehead skin of Altay sheep fetuses. There were only 68 differentially expressed genes (DEGs) identified, consisting of 58 up-regulated genes and 10 down-regulated genes. RXFP2 was differentially up-regulated in the horn buds and had the highest significance (p-value = 7.42 × 10-14). In addition, 32 DEGs were horn-related genes identified in previous studies, such as RXFP2, FOXL2, SFRP4, SFRP2, KRT1, KRT10, WNT7B, and WNT3. Further, Gene Ontology (GO) analysis showed that the DEGs were mainly enriched with regard to growth, development, and cell differentiation. Pathway analysis revealed that the Wnt signaling pathway may be responsible for horn development. Further, through combining the protein-protein interaction networks of the DEGs, it was found that the top five hub genes, namely, ACAN, SFRP2, SFRP4, WNT3, and WNT7B, were also associated with horn development. Our results suggest that only a few key genes, including RXFP2, are involved in bud formation. This study not only validates the expression of candidate genes identified at the transcriptome level in previous studies but also provides new possible marker genes for horn development, which may promote our understanding of the genetic mechanisms of horn formation.

Soft, strong, tough, and durable protein-based fiber hydrogels.

Load-bearing soft tissues normally show J-shaped stress-strain behaviors with high compliance at low strains yet high strength at high strains. They have high water content but are still tough and durable. By contrast, naturally derived hydrogels are weak and brittle. Although hydrogels prepared from synthetic polymers can be strong and tough, they do not have the desired bioactivity for emerging biomedical applications. Here, we present a thermomechanical approach to replicate the combinational properties of soft tissues in protein-based photocrosslinkable hydrogels. As a demonstration, we create a gelatin methacryloyl fiber hydrogel with soft tissue-like mechanical properties, such as low Young's modulus (0.1 to 0.3 MPa), high strength (1.1 ± 0.2 MPa), high toughness (9,100 ± 2,200 J/m3), and high fatigue resistance (2,300 ± 500 J/m2). This hydrogel also resembles the biochemical and architectural properties of native extracellular matrix, which enables a fast formation of 3D interconnected cell meshwork inside hydrogels. The fiber architecture also regulates cellular mechanoresponse and supports cell remodeling inside hydrogels. The integration of tissue-like mechanical properties and bioactivity is highly desirable for the next-generation biomaterials and could advance emerging fields such as tissue engineering and regenerative medicine.

Hierarchically Engineered Manganite Thin Films with a Wide-Temperature-Range Colossal Magnetoresistance Response.

Colossal magnetoresistance is of great fundamental and technological significance in condensed-matter physics, magnetic memory, and sensing technologies. However, its relatively narrow working temperature window is still a severe obstacle for potential applications due to the nature of the material-inherent phase transition. Here, we realized hierarchical La0.7Sr0.3MnO3 thin films with well-defined (001) and (221) crystallographic orientations by combining substrate modification with conventional thin-film deposition. Microscopic investigations into its magnetic transition through electron holography reveal that the hierarchical microstructure significantly broadens the temperature range of the ferromagnetic-paramagnetic transition, which further widens the response temperature range of the macroscopic colossal magnetoresistance under the scheme of the double-exchange mechanism. Therefore, this work puts forward a method to alter the magnetic transition and thus to extend the magnetoresistance working window by nanoengineering, which might be a promising approach also for other phase-transition-related effects in functional oxides.

Echinococcus granulosus: The establishment of the metacestode in the liver is associated with control of the CD4+ T-cell-mediated immune response in patients with cystic echinococcosis and a mouse model.

The larval stage of the tapeworm Echinococcus granulosus sensu lato (E. granulosus s.l.) caused a chronic infection, known as cystic echinococcosis (CE), which is a worldwide public health problem. The human secondary CE is caused by the dissemination of protoscoleces (PSCs) when fertile cysts are accidentally ruptured, followed by development of PSCs into new metacestodes. The local immune mechanisms responsible for the establishment and established phases after infection with E. granulosus s.l. are not clear. Here, we showed that T cells were involved in the formation of the immune environment in the liver in CE patients and Echinococcus granulosus sensu strict (E. granulosus s.s.)-infected mice, with CD4+ T cells being the dominant immune cells; this process was closely associated with cyst viability and establishment. Local T2-type responses in the liver were permissive for early infection establishment by E. granulosus s.s. between 4 and 6 weeks in the experimental model. CD4+ T-cell deficiency promoted PSC development into cysts in the liver in E. granulosus s.s.-infected mice. In addition, CD4+ T-cell-mediated cellular immune responses and IL-10-producing CD8+ T cells play a critical role in the establishment phase of secondary E. granulosus s.s. PSC infection. These data contribute to the understanding of local immune responses to CE and the design of new therapies by restoring effective immune responses and blocking evasion mechanisms during the establishment phase of infection.

Combination of Bevacizumab and Osimertinib in Patients with EGFR T790M-Mutated Non-small Cell Lung Cancer.

BACKGROUND: Osimertinib may improve the prognosis of patients with epidermal growth factor receptor (EGFR) T790M-mutated non-small cell lung cancer (NSCLC); however, to date, the efficacy and safety of osimertinib plus bevacizumab have not been elucidated. OBJECTIVE: We aimed to investigate the additional effect of bevacizumab plus osimertinib compared with osimertinib alone in NSCLC patients with EGFR T790M mutation. METHODS: In this study, 32 patients received osimertinib alone, while 20 patients received osimertinib plus bevacizumab. The median follow-up was 12 months. Overall survival (OS) and progression-free survival (PFS) were estimated and adverse events (AEs) were compared. RESULTS: The overall response rate (ORR) was higher in the combination group than in the osimertinib-alone group (70.0% vs. 43.8%), and the OS (12.8% ± 7.7% vs. 45.4% ± 12.0%; p = 0.038) and PFS (37.3% ± 11.9% vs. 55.3% ± 14.3%; p = 0.045) were also significantly improved in patients who underwent osimertinib plus bevacizumab. Furthermore, the incidence of hypertension was significantly higher in the combination arm when compared with osimertinib alone (p = 0.003), and the number of other AEs were not significantly increased by adding bevacizumab (all p > 0.05). CONCLUSION: Concomitant use of bevacizumab and osimertinib in NSCLC patients with EGFR T790M mutation may have potential therapeutic effect than osimertinib alone. Further studies with a larger number of patients are warranted to confirm results of this study.

Analyzing supply and demand on a general internal medicine ward: a cross-sectional study.

BACKGROUND: The capacity of general internal medicine (GIM) clinical teaching units has been strained by decreasing resident supply and increasing patient demand. The objective of our study was to compare the number of residents (supply) with the volume and duration of patient care activities (demand) to identify inefficiency. METHODS: Using the most recently available data from an academic teaching hospital in Toronto, Ontario, we identified each occurrence of a set of patient care activities that took place on the clinical teaching unit from 2015 to 2019. We completed a descriptive analysis of the frequencies of these activities and how the frequencies varied by hour, day, week, month and year. Patient care activities included admissions, rounds, responding to pages, meeting with patients and their families, patient transfers, discharges and responding to cardiac arrests. The estimated time to complete each task was based on the available data in our electronic medical record system and interviews with GIM physicians and trainees. To calculate resident utilization, the person-hours of patient care tasks was divided by the person-hours of resident supply. Resident utilization was computed for 3 scenarios corresponding to varying levels of resident absenteeism. RESULTS: During the study period, there were 14 581 consultations to GIM from the emergency department. Patient volumes tended to be highest during January and lowest during May and June, and highest on Monday morning and lowest on Friday night. Daily admissions to hospital from the emergency department were higher on weekdays than on weekends, and hourly admissions peaked at 8 am and between 3 pm and 1 am. Weekday resident utilization was generally highest between 8 am and 2 pm, and lowest between 1 am and 8 am. In a scenario in which all residents were present apart from those who were post-call, resident utilization generally never exceeded 100%; in scenarios in which at least 1 resident was absent owing to illness or vacation, it was common for resident utilization to approach or exceed 100%, particularly during daytime working hours. INTERPRETATION: Analyzing supply and demand on a GIM ward has allowed us to identify periods when supply and demand are not aligned and to demonstrate empirically the vulnerability of current staffing models. These data have the potential to inform and optimize scheduling on an internal medicine ward.

Hydrostatic mechanical stress regulates growth and maturation of the atrioventricular valve.

During valvulogenesis, cytoskeletal, secretory and transcriptional events drive endocardial cushion growth and remodeling into thin fibrous leaflets. Genetic disorders play an important role in understanding valve malformations but only account for a minority of clinical cases. Mechanical forces are ever present, but how they coordinate molecular and cellular decisions remains unclear. In this study, we used osmotic pressure to interrogate how compressive and tensile stresses influence valve growth and shape maturation. We found that compressive stress drives a growth phenotype, whereas tensile stress increases compaction. We identified a mechanically activated switch between valve growth and maturation, by which compression induces cushion growth via BMP-pSMAD1/5, while tension induces maturation via pSer-19-mediated MLC2 contractility. The compressive stress acts through BMP signaling to increase cell proliferation and decrease cell contractility, and MEK-ERK is essential for both compressive stress and BMP mediation of compaction. We further showed that the effects of osmotic stress are conserved through the condensation and elongation stages of development. Together, our results demonstrate that compressive/tensile stress regulation of BMP-pSMAD1/5 and MLC2 contractility orchestrates valve growth and remodeling.

Long non-coding RNA ZNF674-AS1 regulates miR-23a/E-cadherin axis to suppress the migration and invasion of non-small cell lung cancer cells.

BACKGROUND: Non-small cell lung cancer (NSCLC) is one of the most common malignant tumors. The prognosis of patients with advanced NSCLC is poor due to metastasis. In recent years, the role of long non-coding RNAs (lncRNAs), a class of non-coding RNA molecules, in NSCLC has become an increasingly popular focus of studies. This study aimed to investigate the effects of ZNF674-AS1 and microRNA (miR)-23a on the migration and invasion abilities of NSCLC cells in vitro and explore the underpinning molecular mechanisms. METHODS: The expression levels of ZNF674-AS1 and miR-23a in NSCLC tissues and cells were detected by quantitative real-time polymerase chain reaction (qRT-PCR). Scratch test and transwell test were used to detect the effects of ZNF674-AS1 and miR-23a on the migration and invasion of NSCLC cells. The luciferase reporter gene experiment was used to verify miRNA targets. Western blot experiments were used to analyze protein expression. RESULTS: ZNF674-AS1 was downregulated in NSCLC tissues and cells, and inhibited the migration and invasion of NSCLC cells in vitro. In contrast, the expression of miR-23a, a downstream target of ZNF674-AS1, was increased in NSCLC tissues and cells. We found that miR-23a could antagonize the role of ZNF674-AS1 in NSCLC. E-cadherin was identified as a downstream target gene of miR-23a, and miR-23a could directly inhibit its expression. CONCLUSIONS: ZNF674-AS1 inhibits the migration and invasion of NSCLC cells by regulating a miR-23a/E-cadherin axis. ZNF674-AS1 and miR-23a could become potential therapeutic targets for NSCLC.

The Determining Role of Nb Interlayer on Interfacial Microstructure and Mechanical Properties of Ti/Steel Clad Plate by Vacuum Rolling Cladding.

We elucidate here the determining role of Nb interlayer on mechanical properties of Ti/steel clad plate fabricated by vacuum rolling cladding (VRC) as a function of different heating temperatures. A critical analysis on the clad interface via electron probe micro-analyzer, X-ray diffractometer and shear testing were conducted to investigate the influence of TiC, Fe-Nb and TiFe compounds and Nb-Ti solid solution on microstructural evolution and shear properties of Ti/steel clad plate. The inter-diffusion between Ti, C and Fe was effectively restrained by adding the Nb interlayer at heating temperature of 800 °C, and average shear strength of 279 MPa was achieved. With increase of heating temperature, Nb-Ti solid solution was formed at the Ti/Nb interface, which reduced mechanical properties of clad plate at 900 °C. At 1000 °C, TiC and Nb-Fe compounds and Nb-Ti solid solution were formed at the interface, and minimum average shear strength of 152 MPa was achieved. The detailed analysis on the clad interface suggested that ideal shear strength can be obtained through the addition of Nb interlayer and selecting appropriate heating temperature.

Largely enhanced energy storage capability of a polymer nanocomposite utilizing a core-satellite strategy.

The development of new generation dielectric materials toward capacitive energy storage has been driven by the rise of high-power applications such as electric vehicles, aircraft, and pulsed power systems. Here we demonstrate remarkable improvements in the energy density and charge-discharge efficiency of poly(vinylidene fluoride) (PVDF) upon the incorporation of core-satellite structures, namely NaNbO3(NN)@polydopamine (PDA)@Ag nanowires. As compared to the NN NWs/PVDF and NN@PDA NWs/PVDF nanocomposites, the NN@PDA@Ag NWs/PVDF nanocomposites exhibit greatly enhanced energy density and significantly suppressed energy loss. As a result, the NN@PDA@Ag NWs/PVDF nanocomposite films with optimized filler content exhibit an excellent discharge energy density of 16.04 J cm-3 at 485 MV m-1, and maintain a high discharge efficiency of 62.8%. Moreover, the corresponding nanocomposite films exhibit a superior power density of 2.1 MW cm-3 and ultra-fast discharge speed of 153 ns. Ultimately, the excellent dielectric and capacitive properties of the polymer nanocomposites could pave the way for widespread applications in modern electronics and power modules.